Select Page

China Aluminum Synchronous Toothed Belt Pulley with Flanges pulley belt

Item Description

CZPT Equipment gives a wide assortment of higher top quality Timing Belt Pulleys and Toothed Bars/ Timing Bars.  Common and non-normal pulleys in accordance to drawings are obtainable.

 
Varieties of materials:
  1. AlCuMgPb 6061 6082 Aluminum Timing Pulley
  2. C45E 1045 S45C Carbon Metal Timing Pulley
  3. GG25 HT250 Cast Iron Timing Pulley
  4. SUS303 SUS304 AISI431 Stainless Metal Timing Pulley
  5. Other material on demand from customers, such as cooper, bronze and plastic
 
Kinds of surface area therapy:
 1.  Anodized area -Aluminum Pulleys
 2.  Hard anodized area — Aluminum Pulleys
 3.  Black Oxidized surface — Steel Pulleys
 4. Zinc plated floor — Steel Pulleys
 5. Chromate surface — Steel Pulleys Cast Iron Pulleys
 6. Nickel plated surface –Metal Pulleys Cast Iron Pulleys
 
Varieties of tooth profile

Tooth Profile Pitch
HTD 3M,5M,8M,14M,20M
AT AT5,AT10,AT20
T T2.5,T5,T10
MXL .08″(2.032MM)
XL one/5″(5.08MM)
L 3/8″(9.525MM)
H one/2″(12.7MM)
XH seven/8″(22.225MM)
XXH 1 1/4″(31.75MM)
STS STPD S2M,S3M,S4.5M,S5M,S8M,S14M
RPP RPP5M,RPP8M,RPP14M,RPP20M
PGGT PGGT  2GT, 3GT and 5GT
PCGT GT8M,GT14M

 
Kinds of pitches and dimensions

Imperial Inch Timing Belt Pulley,
one.     Pilot Bore MXL571 for 6.35mm timing belt teeth quantity from sixteen to 72
two.  Pilot Bore XL037 for 9.53mm timing belt tooth variety from 10 to seventy two
3.  Pilot Bore, Taper Bore L050 for twelve.7mm timing belt teeth quantity from ten to 120
four.  Pilot Bore, Taper Bore L075 for 19.05mm timing belt tooth number from ten to 120
5.  Pilot Bore, Taper Bore L100 for twenty five.4mm timing belt tooth quantity from 10 to 120
six.  Pilot Bore, Taper Bore H075 for 19.05mm timing belt teeth quantity from fourteen to 50
seven.  Pilot Bore, Taper Bore H100 for 25.4mm timing belt teeth quantity from 14 to 156
8.  Pilot Bore, Taper Bore H150 for 38.1mm timing belt enamel number from fourteen to 156
9.  Pilot Bore, Taper Bore H200 for fifty.8mm timing belt tooth quantity from 14 to 156
ten.  Pilot Bore, Taper Bore H300 for 76.2mm timing belt enamel quantity from 14 to 156
eleven.  Taper Bore XH200 for 50.8mm timing belt enamel number from 18 to one hundred twenty
12.  Taper Bore XH300 for seventy six.2mm timing belt teeth amount from eighteen to 120
thirteen.  Taper Bore XH400 for a hundred and one.6mm timing belt teeth amount from eighteen to a hundred and twenty

Metric Timing Belt Pulley T and AT
1.  Pilot Bore T2.5-16 for 6mm timing belt tooth number from 12 to 60 
two.   Pilot Bore T5-21 for 10mm timing belt enamel number from 10 to 60 
three.   Pilot Bore T5-27 for 16mm timing belt tooth number from 10 to 60 
four.   Pilot Bore T5-36 for 25mm timing belt enamel variety from ten to 60 
5.   Pilot Bore T10-31 for 16mm timing belt tooth variety from 12 to 60 
6.   Pilot Bore T10-40 for 25mm timing belt teeth variety from twelve to 60 
7.   Pilot Bore T10-47 for 32mm timing belt teeth number from 18 to 60 
eight.   Pilot Bore T10-66 for 50mm timing belt tooth number from eighteen to 60
nine.  Pilot Bore AT5-21 for 10mm timing belt tooth variety from 12 to 60
ten. Pilot Bore AT5-27 for 16mm timing belt tooth quantity from 12 to 60
11. Pilot Bore AT5-36 for 25mm timing belt enamel number from twelve to 60 
twelve. Pilot Bore AT10-31 for 16mm timing belt enamel amount from 15 to 60 
13. Pilot Bore AT10-40 for 25mm timing belt enamel amount from 15 to 60 
14. Pilot Bore AT10-47 for 32mm timing belt teeth amount from eighteen to 60 
15. Pilot Bore AT10-66 for 50mm timing belt tooth number from 18 to sixty
  
Metric Timing Belt Pulley HTD3M, 5M, 8M, 14M 
1.  HTD3M-06 3M-09 3M-fifteen tooth quantity from 10 to 72 
two.  HTD5M-09 5M-15 5M-twenty five enamel variety from 12 to 72 
three.  HTD8M-twenty 8M-thirty 8M-fifty 8M-85 tooth amount from 22 to 192 
4.  HTD14M-forty 14M-fifty five 14M-eighty five 14M-one hundred fifteen 14M-a hundred and seventy enamel number from 28-216 
5.  Taper Bore HTD5M-fifteen 8M-twenty 8M-30 8M-50 8M-85 14M-forty 14M-fifty five 14M-85
         14M-115 14M-one hundred seventy

Metric Timing Belt Pulleys for Poly Chain GT2 Belts 
one.      PCGT8M-12 PCGT8M-21 PCGT8M-36 PCGT8M-62 
2.      PCGT14M-twenty PCGT14M-37 PCGT14M-sixty eight PCGT14M-ninety PCGT14M-one hundred twenty five

Power Grip CZPT Tooth/ PGGT 2GT, 3GT and 5GT 
1. 2GT-06, 2GT-09 for timing belt width 6mm and 9mm 
2. 3GT-09, 3GT-15 for timing belt width 9mm and 15mm 
3. 5GT-fifteen, 5GT-twenty five for timing belt width 15mm and 25mm

OMEGA RPP HTD Timing Pulleys 
one.   RPP3M-06 3M-09 3M-fifteen enamel amount from 10 to 72 
2.   RPP5M-09 5M-fifteen 5M-twenty five enamel variety from 12 to 72 
three.   RPP8M-20 8M-thirty 8M-50 8M-85 enamel variety from 22 to 192 
4.   RPP14M-forty 14M-55 14M-85 14M-a hundred and fifteen 14M-one hundred seventy tooth amount from 28-216 
5.  Taper Bore RPP5M-fifteen 8M-20 8M-30 8M-fifty 8M-eighty five 14M-40 14M-fifty five 14M-85
     14M-a hundred and fifteen 14M-170

US $1.3
/ Piece
|
1 Piece

(Min. Order)

###

Certification: ISO
Pulley Sizes: Timing
Manufacturing Process: Sawing
Material: Aluminum
Surface Treatment: Zinc Coating
Application: Chemical Industry, Grain Transport, Mining Transport, Power Plant

###

Samples:
US$ 3/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Teeth Profile Pitch
HTD 3M,5M,8M,14M,20M
AT AT5,AT10,AT20
T T2.5,T5,T10
MXL 0.08"(2.032MM)
XL 1/5"(5.08MM)
L 3/8"(9.525MM)
H 1/2"(12.7MM)
XH 7/8"(22.225MM)
XXH 1 1/4"(31.75MM)
STS STPD S2M,S3M,S4.5M,S5M,S8M,S14M
RPP RPP5M,RPP8M,RPP14M,RPP20M
PGGT PGGT  2GT, 3GT and 5GT
PCGT GT8M,GT14M
US $1.3
/ Piece
|
1 Piece

(Min. Order)

###

Certification: ISO
Pulley Sizes: Timing
Manufacturing Process: Sawing
Material: Aluminum
Surface Treatment: Zinc Coating
Application: Chemical Industry, Grain Transport, Mining Transport, Power Plant

###

Samples:
US$ 3/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Teeth Profile Pitch
HTD 3M,5M,8M,14M,20M
AT AT5,AT10,AT20
T T2.5,T5,T10
MXL 0.08"(2.032MM)
XL 1/5"(5.08MM)
L 3/8"(9.525MM)
H 1/2"(12.7MM)
XH 7/8"(22.225MM)
XXH 1 1/4"(31.75MM)
STS STPD S2M,S3M,S4.5M,S5M,S8M,S14M
RPP RPP5M,RPP8M,RPP14M,RPP20M
PGGT PGGT  2GT, 3GT and 5GT
PCGT GT8M,GT14M

What is a pulley?

Pulleys are shafts or wheels on a shaft that support the movement and change of direction of a taut cable. The pulley also transfers power from the shaft to the cable. A simple pulley is used to raise the school flag. Read on to learn about the basic types of pulleys. We also covered the use of pulleys in everyday life. Read on to learn more about this important mechanical part.
pulley

composite pulley

A composite pulley is a mechanical system where two or more pulleys and ropes are connected together. It reduces the force required to lift the load because the force is divided by the distance of each pulley. Distance is equal to the mass of the object. Composite pulleys are a common mechanical system on sailboats. Composite pulleys can be used to lift heavy equipment such as sails.
The compound pulley unit consists of two pulleys, one fixed and the other movable. The fixed pulley is fixed overhead, while the movable pulley is connected to the load by a chain. The lift applies force to the other end of the rope. Anchor points are attached to fixed joists, ceiling joists or sturdy branches. The chain should be long enough to support the load during lifting.
Composite pulleys can be made from a variety of materials. Some are fixed and remain fixed. Others are detachable. The composite pulley combines the advantages of both types, making it a versatile tool. In the table below, these three types of pulleys are compared. It’s easy to see which one is best for your needs. The right choice depends on your specific needs and budget.
The compound pulley system consists of two fixed pulleys and one movable pulley. The compound pulley system multiplies the force by a factor of 2. The compound pulley system is particularly suitable for heavy loads and is ideal for construction sites. Workers apply less than half the load force on the composite pulley, significantly reducing the force required. This is a major benefit for many people.

Fixed pulley

Fixed pulleys are fixed gears of fixed length that are mounted on solid objects. There are many different types of pulley systems. Some cooperate with each other, but not “fixed”.
Fixed pulleys can be used for a variety of purposes. One application is to lift small objects. They have a one-to-one mechanical advantage. Often, a single pulley can lift small loads. The force required to lift a single fixed pulley remains the same. They are usually used to lift lighter objects. They can even be attached to buckets used to draw water from wells.
While single fixed pulleys have desirable mechanical advantages, they are not suitable for force multipliers. Because their mechanical advantage diminishes over time, they are not effective force multipliers. They are used to redirect work so that it can be applied in the most convenient direction. This mechanical advantage is the main advantage of fixed pulleys and the most common way of moving objects. They have several benefits, including the ability to increase the speed of moving objects.
Another application for fixed pulleys is lifting supplies. A scaffold can weigh more than one and can be directly hoisted. In order to facilitate the transportation of materials, fixed pulleys are usually installed on the top of the scaffolding on construction sites. Then thread the rope through the edge of the groove that holds the pulley. The fixed pulley exerts the same force on the pull side as on the push side. The same is true for moving objects with fixed pulleys.
pulley

moving pulley

A movable pulley is a device whose part is fixed to another object, usually a rod or beam. The movable part moves with the load, making the load feel lighter. This is a useful tool for those who need to carry heavy items such as large bags. The advantages of moving pulleys are many. Here are some of them. Read on to learn more about them.
One of the most common uses of movable pulley systems is climbing high objects. Climbers act as pulley loads and pull ropes to lift objects. Eventually, when the traction stops, the climber descends. However, it is still a useful tool in other situations. The movable pulley system can help you climb the tallest objects or lift them to level surfaces.
Another example of movable pulleys is in industry. Depending on the load, movable pulleys make handling and moving loads easier. You can use them in a variety of applications in manufacturing and industry, including cleaning. For example, the American flag is raised and lowered every day. Removable pulleys are a handy tool when buildings need cleaning.
If you’re not sure whether a task requires a pulley, a zipline might be a good option. Connect the two ends of the rope and the pulley will move along the rope, then attach the rope to the metal cable. The load is the person holding the pulley, and the force comes from the attachment on the other end of the rope. There are two types of live pulleys: simple pulleys with just one wheel and live pulleys with many ropes attached.

School flag raised with simple pulleys

How is the school flag raised? It is pulled up by a rope attached to a pulley at the top of the pole. When the rope is pulled, the pulley turns, raising the flag. A pulley is a simple mechanism that helps people move heavier objects with ease. The rope must be securely attached to the pulley to keep the flag stable.
A simple pulley is a spinning wheel with grooves on one side and ropes on the other. The rope can be any length and the wheels can be any size. The rope has to go through the groove and the load is attached to the other end of the rope. Simple pulleys are pulleys with fixed shafts. An example is the wheel on a school flagpole.
A simple pulley system consists of a primary pole, a secondary pole and an outer member. The primary flagpole is connected to the track by a detour, while the secondary flagpole is connected to the track by a pipe. There is a groove on one side of the track, which passes through the inner cavity of the flagpole. An open track at the upper end of the track connects the two parts of the pulley.
A simple pulley can be used for many purposes. This is a useful machine that can be used to raise the flag. Among other things, it can be used in clothing lines, bird feeders, and even roofers. And, of course, you can use the pulley to raise the flag. Its versatility makes it an essential part of school decor.
pulley

cast iron pulley

If you are looking for pulleys for your machine, you may come across cast iron pulleys. They are usually cheap and available in a variety of sizes. The rim is held in place by a mesh attached to a central boss. The arms and spokes can be straight or curved, but most are oval. There are many uses for this type of pulley.
You might wonder why the arms of cast iron pulleys are so curved. Bent arms tend to yield rather than break. Cast iron pulleys are usually round with a slight bump on the rim, which helps keep the belt centered on the rim as it moves. On a 300mm diameter pulley, the bumps may be as small as 9mm.

China Aluminum Synchronous Toothed Belt Pulley with Flanges     pulley belt	China Aluminum Synchronous Toothed Belt Pulley with Flanges     pulley belt
editor by czh 2022-12-22

gear pulley

As one of leading gear pulley manufacturers, suppliers and exporters of products, We offer gear pulley and many other products.

Please contact us for details.

Mail:gear-pulley.com

Manufacturer supplier exporter of gear pulley

Recent Posts